Buick project

2022.01.22 11:36 JaidensDiecast Buick project

Buick project submitted by JaidensDiecast to PixelCarRacer [link] [comments]


2022.01.22 11:36 Arioch77 Ender5/SKR1.3/TMC2208 - move out of range error after reinstall

Hi evryone,
After frying my rasp/sd card, I reinstalled octopi/klipper with lastest version. But it appear some variable in printer.cfg changed. Was able to adapt almost everything ( step_distance / microsteps / rotation distance etc... ) , connect to printer ok, able to move all axis.

But trying tu do a mesh bed calibrate result in a fail with a " Move out of range: -41.000 14.000 5.000 [0.000] ".
Pretty sure it's something stupid that I don' see, But an external eyes could help. And the "same" cfg was working on old octopi/klipper.
Thanks
Full printer.cfg :

# Paste here and save your klipper configuration # This file contains common pin mappings for the BIGTREETECH SKR V1.3 # board. To use this config, the firmware should be compiled for the # LPC1768. # See the example.cfg file for a description of available parameters. [stepper_x] step_pin: P2.2 dir_pin: P2.6 enable_pin: !P2.1 #step_distance: .0125 microsteps: 16 rotation_distance: 40 endstop_pin: P1.29 # P1.28 for X-max position_endstop: 0 position_max: 235 homing_speed: 30 [stepper_y] step_pin: P0.19 dir_pin: P0.20 enable_pin: !P2.8 #step_distance: .0125 microsteps: 16 rotation_distance: 40 endstop_pin: P1.27 # P1.26 for Y-max position_endstop: 0 position_max: 235 homing_speed: 30 [stepper_z] step_pin: P0.22 dir_pin: !P2.11 enable_pin: !P0.21 #step_distance: .0025 microsteps: 16 rotation_distance: 16 #8 endstop_pin: probe:z_virtual_endstop #endstop_pin: P1.25 # P1.24 for Z-max #position_endstop: 0.0 position_max: 300 position_min: -3 [extruder] step_pin: P2.13 dir_pin: !P0.11 enable_pin: !P2.12 #step_distance: .010526 microsteps: 16 rotation_distance: 33.683 nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: P2.7 sensor_type: EPCOS 100K B57560G104F sensor_pin: P0.24 control: pid pid_Kp: 21.527 pid_Ki: 1.063 pid_Kd: 108.982 min_temp: 0 max_temp: 250 [heater_bed] heater_pin: P2.5 sensor_type: EPCOS 100K B57560G104F sensor_pin: P0.23 control: pid pid_Kp: 54.027 pid_Ki: 0.770 pid_Kd: 948.182 min_temp: 0 max_temp: 130 [fan] pin: P2.3 [heater_fan noozle_fan] heater: extruder shutdown_speed: 0 cycle_time: 0.010 kick_start_time: 0.100 heater_temp: 50 fan_speed: 1.0 pin: P2.4 [mcu] serial: /dev/serial/by-id/usb-Klipper_lpc1769_15400112C71039AF3125F45BC72000F5-if00 [printer] kinematics: cartesian max_velocity: 300 max_accel: 3000 max_z_velocity: 5 max_z_accel: 100 ######################################## # TMC2208 configuration ######################################## # For TMC2208 UART # 1) Remove all of the jumpers below the stepper drivers # 2) Place jumpers on the red pin headers labeled XUART (XUART, YUART etc.) [tmc2208 stepper_x] uart_pin: P1.17 #microsteps: 16 run_current: 0.700 hold_current: 0.500 stealthchop_threshold: 250 [tmc2208 stepper_y] uart_pin: P1.15 #microsteps: 16 run_current: 0.700 hold_current: 0.500 stealthchop_threshold: 250 [tmc2208 stepper_z] uart_pin: P1.10 #microsteps: 16 run_current: 0.700 hold_current: 0.450 stealthchop_threshold: 30 [tmc2208 extruder] uart_pin: P1.8 #microsteps: 16 run_current: 0.800 hold_current: 0.500 stealthchop_threshold: 5 ########################################################## # # # BLTOUCH # # # ########################################################## [bltouch] sensor_pin: P1.24 control_pin: P2.0 x_offset: 42.0 y_offset: 16.0 z_offset: 1.65 speed: 5.0 samples: 2 sample_retract_dist: 8.0 pin_up_touch_mode_reports_triggered: False [homing_override] axes: z gcode: G90 G1 Z15 G28 X Y G1 X76 Y120 F6000 G28 Z set_position_z: 0.0 [bed_mesh] #speed: 80 speed: 250 # after validation horizontal_move_z: 5 #min_point: 1,30 #max_point: 180,200 mesh_min: 1,30 mesh_max: 180,200 probe_count: 5,5 [gcode_macro G29] gcode: G28 BED_MESH_CALIBRATE G0 X10 Y10 Z10 F6000 # This adds a screw tilt adjust command that probes certain points on the bed and recommends new bed screw positions (turn clockwise this much etc) [screws_tilt_adjust] screw1: 50,50 screw1_name: Front left screw screw2: 50,215 screw2_name: Rear left screw screw3: 225,50 screw3_name: Front right screw screw4: 225,225 screw4_name: Rear right screw horizontal_move_z: 10 speed: 250 screw_thread: CW-M3 ######################################## # EXP1 / EXP2 (display) pins ######################################## [board_pins] aliases: # EXP1 header EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=, EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>, # EXP2 header EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=, EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=, EXP2_10= # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0" ###################################################################### # 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay ###################################################################### [display] lcd_type: st7920 cs_pin: EXP1_7 sclk_pin: EXP1_6 sid_pin: EXP1_8 encoder_pins: ^EXP1_5, ^EXP1_3 click_pin: ^!EXP1_2 [output_pin beeper] pin: EXP1_1 
submitted by Arioch77 to klippers [link] [comments]


2022.01.22 11:36 LorkiDorki EXCLUSIVE!! James Webb Telescope sends first pictures

EXCLUSIVE!! James Webb Telescope sends first pictures submitted by LorkiDorki to space [link] [comments]


2022.01.22 11:36 Cinema7D TIL James Cameron drew the "Rose" painting in Titanic by himself, amongst some other paintings in Jacks Art book. He also draws mood shots amd studies for his other movies.

submitted by Cinema7D to todayilearned [link] [comments]


2022.01.22 11:36 Burberrykillah School and gaming set up

School and gaming set up submitted by Burberrykillah to battlestations [link] [comments]


2022.01.22 11:36 ratperson420 [New] RPVC - City Slickah [Instrumental] (Original)

[New] RPVC - City Slickah [Instrumental] (Original) submitted by ratperson420 to PromoteYourMusic [link] [comments]


2022.01.22 11:36 LordSkoll13 What is this? It was in a mix of succulents, but none of them was described.

submitted by LordSkoll13 to whatsthisplant [link] [comments]


2022.01.22 11:36 flashbackon Need a pre-built tip

So I saw the exploding prices on cards and bullshit like that and I saw some really attractive offer recently and I wanted to hear reddits opinion. Its an asus rog strix pre-built model nam gt 35 g35. Comes with an i7 11700kf Rtx 3080 Z590 motherboard. 32gigs 2 sticks ddr4 3200mhz 1tb ssd and 1tb hdd 7.2k rpm. 240mm liquid cooling hot swap ssd and such. To be honest I wanted to custom build but honestly at my budget this is a much better option at this price spec wise. The exact spec is asus rog auros gt35 G35CG-1170KF0670 do anybody recommend anything else. Does anyone here have some experience with this model? Would love to hear!
submitted by flashbackon to buildapc [link] [comments]


2022.01.22 11:36 05tothemoon Turns out #bitcoin is actually a hedge against prosperity.

Who knew?
submitted by 05tothemoon to dogecoin [link] [comments]


2022.01.22 11:36 MeAndTheLampPost Facebook screenshot shows only half of page

Today I used the Firefox screenshot tool to save a posting on Facebook. No matter what I try, it only shows half the page, horizontally. Using Firefox 96.0.2 on macOS 10.15.
Does that happen to you as well? On Reddit it works normally. I've opened Facebook in a private window, so without addons - same problem.
Can you test this and tell me your OS?
submitted by MeAndTheLampPost to firefox [link] [comments]


2022.01.22 11:36 Jaidata Tissot Men's Stainless Steel Swiss Quartz Watch - $147.98

Tissot Men's Stainless Steel Swiss Quartz Watch - $147.98 submitted by Jaidata to DealsAndGlitches [link] [comments]


2022.01.22 11:36 awesomesound1212 7/4/10 Alpharetta Jiboo

https://youtu.be/9X_L4VfidMQ
Have a nice day, again…
submitted by awesomesound1212 to phish [link] [comments]


2022.01.22 11:36 ZoobBot 202535

This is the 202535th time I made this shitty comment. I hate this job.
submitted by ZoobBot to shittyjobsforrobots [link] [comments]


2022.01.22 11:36 ThaButterdog I want to learn how to draw and wanted to start with clothing. This is my first one so far. What do you guys think?

I want to learn how to draw and wanted to start with clothing. This is my first one so far. What do you guys think? submitted by ThaButterdog to drawing [link] [comments]


2022.01.22 11:36 hithereyoufatlemon Just repotted VFTs, what do I do now!

Just repotted VFTs, what do I do now! submitted by hithereyoufatlemon to VenusFlyTraps [link] [comments]


2022.01.22 11:36 Venger-2k Heel

Heel submitted by Venger-2k to Maddiezieglerfeet [link] [comments]


2022.01.22 11:36 DrGrundle Can you remove the people from this photo? I know there's a million. Will tip $10

Can you remove the people from this photo? I know there's a million. Will tip $10 submitted by DrGrundle to PhotoshopRequest [link] [comments]


2022.01.22 11:36 MatthewVale Day Night Cycle + Snow Shader For My Casual Village Builder

Day Night Cycle + Snow Shader For My Casual Village Builder submitted by MatthewVale to Unity3D [link] [comments]


2022.01.22 11:36 alexey122 brokey pause button with quest 1 link with pc -vrmode oculus beatsaber

why is the pause button only working when your not moving your hand in beatsaber -vrmode oculus (only -vr mode oculus), and also it just has a few milliseconds of delay when im not moving, but if i swing and try to pause it just wont pause no matter what
no other button is delayed and i tried a different controller
ik there is a setting to adjust how long you need to wait for it to pause in game but its not that (set to 0)
how do i fix, or remap the controller button πŸ’€πŸ’€
submitted by alexey122 to OculusQuest [link] [comments]


2022.01.22 11:36 snorlaxgirl1 I wanted to make the bed but she didn't want to move πŸ˜„

I wanted to make the bed but she didn't want to move πŸ˜„ submitted by snorlaxgirl1 to standardissuecat [link] [comments]


2022.01.22 11:36 Celli579 I'm gonna be waiting for some time!

I'm gonna be waiting for some time! submitted by Celli579 to apexlegends [link] [comments]


2022.01.22 11:36 thatsAhotChip Just turned one, full concentration on the ball πŸ˜‚ 🎾

Just turned one, full concentration on the ball πŸ˜‚ 🎾 submitted by thatsAhotChip to Rottweiler [link] [comments]


2022.01.22 11:36 ethanwinters-hands I did a thing. Hope you like it! : TERMINATOR 2 - Bar Scene but with Giorno's Theme

I did a thing. Hope you like it! : TERMINATOR 2 - Bar Scene but with Giorno's Theme submitted by ethanwinters-hands to ShitPostCrusaders [link] [comments]


2022.01.22 11:36 Immediate_Thought656 Playoffs!

submitted by Immediate_Thought656 to NFLBETS [link] [comments]


2022.01.22 11:36 BriefRelationship934 Is that true ?

Is that true ? submitted by BriefRelationship934 to Judaism [link] [comments]


http://shopkolibri.ru