Potential Cap Moves

2022.01.25 14:34 LeFlame-Please Potential Cap Moves

Since Matt Lafleur publicly stated that there is no plan for a rebuild and there is always to move cap around, could the packers look to move Aaron Jones?
Aaron Jones has been one of my favorite players since the “Free Aaron” days in the McCarthy era, but he has a massive contract for splitting snaps with AJ. Not even mentioning how good Patrick Taylor has looked when he has had reps.
submitted by LeFlame-Please to GreenBayPackers [link] [comments]

2022.01.25 14:34 BruceMii Champion changes I would make

Ash - Increase damage to 450 per shot
Imani - Increase ice bolt projectile size by 10%
Imani - Pyromania reduces fireball damage to 900 instead of 800
Io - Luna can now stun every 15 seconds
Khan - Talus can’t teleport out of your ult. (the timer is frozen while he’s in your hand)
Koga - Reduce skewer damage to 400. Skewer now uses one 1 bar of energy
Octavia - Increase Octavia’s leap speed. You can also now hold the fire button to continue shooting
Rei - Make it easier to lock onto enemies with your spirit link when teammates are next to you
Skye - Skye can now climb walls
Vivian - Booby trap talent knocks Vivian back too but does no damage
Ying - When a Life Exchange shatter heal misses, the cooldown is reduced
Ying - Extra focusing lense damage applies to shields too
submitted by BruceMii to Paladins [link] [comments]

2022.01.25 14:34 DemUnderground Patriot Front's cameo at March For Life echoes an alarming historical alliance

submitted by DemUnderground to DemocraticUnderground [link] [comments]

2022.01.25 14:34 Rgelm Grand Canyon western rim January 2022

Grand Canyon western rim January 2022 submitted by Rgelm to NationalPark [link] [comments]

2022.01.25 14:34 Surf-n-travel Helpful SBA Employee contact info

Does anyone have the contact info for any SBA reps that have gone above and beyond for them and are willing to share their info? As we all know finding a genuinely helpful rep within the SBA has about the same odds as winning a state lottery. That being said if you had a loan assistant, loan officer or any other employee that really went out of their way to help you, would you please share their info here or via DM? Obviously would never say I received their info from you..
submitted by Surf-n-travel to EIDLreturns [link] [comments]

2022.01.25 14:34 Opposite-Discount340 Game Platform Clarification

What Fire Emblem games were released on the Nintendo DS and 3DS and are NOT available on the Switch or another Nintendo platform?
submitted by Opposite-Discount340 to fireemblem [link] [comments]

2022.01.25 14:34 DemUnderground Who convinced trump to not sign the draft executive order?

submitted by DemUnderground to DemocraticUnderground [link] [comments]

2022.01.25 14:34 rosebudbeans “No! It’s too strong and it’s too wiggly!”

My two year old, when I asked them if they wanted juice.
Can’t argue with that, I guess?
submitted by rosebudbeans to toddlers [link] [comments]

2022.01.25 14:34 AdFar9486 Is pureology worth the money?

I would just get the conditioner. I swear by the awipuhi paul mitchell shampoo and it makes my hair not greasy for 2 days (which is amazing, my roots get so greasy) I have fine thin hair thats bleached, its for the most part healthy now. Just my ends do get tangled easily, guessing from a mix of a little bit damaged and just being thin
I love the scent of pureology, I’ve used my friends before and liked it. I just don’t know if its crazy to spend $39 on condition when i wash my hair so much
submitted by AdFar9486 to Hair [link] [comments]

2022.01.25 14:34 juliastarrr Is it legal for an employer to pay an intern 1/3 minimum wage for training?

If an employer says that your training is a learning opportunity, and they want you to have a certain set of skills but these skills are useful for a future opportunity, is that legal? (CA)
submitted by juliastarrr to Ask_Lawyers [link] [comments]

2022.01.25 14:34 Son_Postman For those of us that will be at the game

When we have the ball, just shut the heck up, don’t yell at 49ers fans to sit down, don’t scream ‘go rams’, don’t make any noise whatsoever. Just be quiet. Even if Niners fans take up 60% of the stadium (which I don’t think will happen), they can’t make that much noise to make up the rest.
Aside from not selling our tickets, we can do our part AT the game too. Encourage the people around you to stay silent when we have posssesion as well.
I hope to see you all there. RAMS HOUSE!!
submitted by Son_Postman to LosAngelesRams [link] [comments]

2022.01.25 14:34 Viewfromthe31stfloor Israeli experts recommend offering a fourth vaccine dose to people age 18 and over.

Israeli experts recommend offering a fourth vaccine dose to people age 18 and over. submitted by Viewfromthe31stfloor to Coronavirus [link] [comments]

2022.01.25 14:34 DemUnderground Oath Keepers leader Elmer Stewart Rhodes pleads not guilty to seditious conspiracy in Capitol riot i

submitted by DemUnderground to DemocraticUnderground [link] [comments]

2022.01.25 14:34 marieke333 Framed UL backback

Made my first backpack. My own design as I couldn’t find a pattern for the UL full framed bag that I wanted. It was a hell of a job to design it and make it but it turned out great. I used the pack last summer on a 7 week thru hike and on several weekends. It performs fantastic except that I found out rodents can make a hole in X-pac X21. This is the first backpack that actually fits me.
Weight and volume
830 g. A bit heavier then planned. Volume somewhere between 45 and 50l in main compartment.
Pack fabric: X-PAC X21 RC (150 gms), hip belt partly Robic 210
Stretch fabric belt & shoulder straps: 330 den stretch cordura (ca 200 gms)
Mesh back panel and pocket: polyamide mesh (106 gms)
Webbing: shoulder straps 20 mm polyamide, hip belt strap 25 mm, sternum strap 15 mm, compression side straps 10 mm
Foam back panel: piece of a Ridgerest classic
Frame sheet: 0,5 mm HDPE sheet, 12 cm wide.
Hip belt stiffener: 1 mm PP sheet, perforated.
Foam hip belt & shoulder straps: 9 mm Evazote 50
Stays: 6mm diameter, 1mm wall thickness aluminium tube. I used a beam calculator https://www.engineering.com/calculators/beams.htm to find the lightest option that would a bit more flexible than the single stay in my old Bach trekking backpack (flat bar 25mm x 3,2 mm, 1”x 1/8”)
Roll top stiffener: piece of plastic strap as they use for keeping together pallets and big carton boxes (they are laying around everywhere in my local building/DIY market).
Frame construction
I wanted excellent weight transfer to the hips, so I made the frame sheet (plus stays) go into a pocket on the hip belt. First I tried 1 mm HDPE with one stay in the middle (still on the pictures), but 0,5 mm HDPE with two stays on both sides turned out to be more stable and lighter.
It took some time to figure out how I could make the frame sheet go from a sleeve inside of the back (cannot be outside because of the shoulder straps connection) to the outside of the back.
The frame sheet extends until the load lifter straps. There I have sewn in a kind of flap with piece of horizontal alu tube to transfer the force on the load lifters to the frame sheet. See pictures.
Hip belt
I carry almost all weight on my hips and don’t like floppy, collapsing hip belts. Alas I could not source adequate stiff foam so I tried the 1 mm PP from the frame sheet. That was too stiff, so I ordered 0.5 mm HDPE which turned out too floppy. Probably 0.8 mm is the sweat spot. I gave up on ordering the wrong plastic sheets and foam and perforated the 1 mm PP with my biggest drill (10 mm) until it had enough flexibility.
The outside is X-pac X21 reinforced with a strip of 20 mm light webbing over the full length. First, I tried without but X21 is not nearly strong enough to bear the forces on a hip belt. For the inside of the hip belt I used stretch poly. I stitched both sides together after adding the pockets, turned inside out and rolled over de foam like a condom. After that it was easy to slide in the plastic sheet.
Side pockets
Had a hard time to figure out the right size. Made them too small first. The rule of thumb that I found somewhere online, “wide of the pack + 5 inch” is quite adequate, I ended up with 4.5” extra.
I tried to fold the bottom part like I saw on many packs, but that did not give enough space in the bottom part, so I sew in a small bottom, about 5 cm/2” deep. Probably for the folding method you should cut the lower part wider than the top part.
The shock cord can be replaced. On both side there is a small loop for attachment of the shock cord. On one side a tanka for tensioning.
In the bottom is a draining hole made with a small grommet.
Back panel
One piece of foam over the whole wide for ease of construction and give shape to the pack. The Ridgerest is unnecessary thick, but I like the ribs that give a more airy feeling than flat foam.
Belt pockets
I copied the pockets from my Crown 60. Forgot that my MYOG hip belt has a different, more conical shape so hard to fit them.
Chest strap:
I was hard to find a 20/15 mm sternum strap buckle, Adventure Gear sells them, but I ordered the wrong size. Instead I used the simple system found on older packs that does not requires special buckles. Adds a few grams though for extra webbing.
Where possible I used flat felled seams. The two side seams on the back panel and the bottom are just sewn together, double stitched (with 2 mm distance) and I added very thin grosgrain ribbon against fraying. This is probably not necessary with the X-pac, could have saved some weight. I kept the seams uncovered by the grosgrain to be able to seal the seams. I sealed all seams from inside with seam grip. Because of the construction some seams where not accessible (next time I will seal these earlier).
Things I would do different next time:
Use cordura 330 for the back panel and hip belt (stronger, little extra weight).
Use a thicker tread, 60 instead of 80.
I don’t thing the contoured shape adds a lot, it makes the pack stiffer and it could actually need a bit more lateral flex.
The pocket on the belt that holds the frame sheet is too small, a bigger pocket would allow the construction to move a bit more and feel less stiff.
submitted by marieke333 to myog [link] [comments]

2022.01.25 14:34 crytoloover Plug Chain AMA - New Year Edition (2022, Chinese Language)

Plug Chain AMA - New Year Edition (2022, Chinese Language) submitted by crytoloover to CoinMarketDo [link] [comments]

2022.01.25 14:34 Valdvostok Narlax or Yan?

I am about to end W4 and need more awakenings to keep progressing, I am decided to get one of the 2 since, for what I read, they are some of the best heroes in the game. I currently use NC R5, Efrigid R4 and Helios R4 (I know that I also need Sethos to unlock their lvl2 abilities).
submitted by Valdvostok to RealmDefenseTD [link] [comments]

2022.01.25 14:34 DemUnderground Supreme Court takes EPA case that could narrow Clean Water Act.

submitted by DemUnderground to DemocraticUnderground [link] [comments]

2022.01.25 14:34 Ljungstroem ADA-1 is selling Radiant Light (Charged with Light mod)

ADA-1 is selling RADIANT LIGHT - Gives you a passive 20+ strength if you have another Arc mod or CwL mod equipped.
Go spend your soon to be useless mod components!
submitted by Ljungstroem to DestinyTheGame [link] [comments]

2022.01.25 14:34 whogivesashirtdotca Kristen Stewart and Stephen Colbert compare their Viggo crushes

Kristen Stewart and Stephen Colbert compare their Viggo crushes submitted by whogivesashirtdotca to viggomortensen [link] [comments]

2022.01.25 14:34 Tommybo89 CAESARS PENDING

I made a withdrawal on January 13th and it still says sent to processor. My friend tried to take out 500 and his has said pending for a week. wtf is wrong with this. such bullshit. Ive emailed them 3 times and checked emails/spam folder. Why do I feel like we are never going to get our money?
submitted by Tommybo89 to sportsbook [link] [comments]

2022.01.25 14:34 lynxss1 I'm helping

I'm helping
submitted by lynxss1 to blackcats [link] [comments]

2022.01.25 14:34 MusicLabBeats [Afro Beat] Afro House - "Panic"

[Afro Beat] Afro House - submitted by MusicLabBeats to Youtubeviews [link] [comments]

2022.01.25 14:34 swamt07 Join this NFT server

submitted by swamt07 to invitesforthediscord [link] [comments]

2022.01.25 14:34 DemUnderground Why is Tucker Carlson so pro-Russia?

submitted by DemUnderground to DemocraticUnderground [link] [comments]

2022.01.25 14:34 FIPSSSSSS 【Webcomic】Terraria·Ideal order

【Webcomic】Terraria·Ideal order Howdy!FIPS here!
Here is a webcomic that I recently produced for non-commercial use, in which some sprites of arcade games are used, and some of them are drawn by myself.
In the future, each updated comic will be published on this thread.
I hope you like it :P
submitted by FIPSSSSSS to Terraria [link] [comments]